Installing a 22LR Conversion Kit

 

Looking for a quick how-to for a CMMG .22 LR Conversion kit? We've got the short and sweet step by step and even a video if you're not in a reading mood.

Installing a .22 LR Conversion Kit in a 5.56mm AR15 or CMMG Mk4 5.56mm upper

  1. Remove the magazine and verify your firearm is unloaded.
  2. Push the takedown pin and swing the upper and lower receiver apart.
  3. Remove the 5.56 bolt carrier group.
  4. Make sure the black protective cap on conversion BCG is removed and install into the upper receiver as you would the standard BCG.

 

Installing a .22LR  Conversion Kit in a 5.56mm DISSENT Upper

  1. Remove the magazine and verify your firearm is unloaded.
  2. Push the takedown pin and swing the upper and lower receiver apart.
  3. Remove the 5.56 bolt carrier group.
  4. Slide the DISSENT 22 Conversion Adapter into the upper with the arrows facing up and forward towards the muzzle. This piece is included with 5.56mm DISSENT firearms and is also available on the CMMG website.
  5. Make sure the black protective cap on conversion BCG is removed and install into the upper receiver as you would the standard BCG.
Back to Blog

Related Articles

How To Run The .22 LR AR Conversion Kit In Your DISSENT

Visiting the range may not be as painful on the wallet as it was just a few short years ago, but...

Which CMMG .22LR Conversion Kit For Me?

Like many of us, you'd like to get out and hit the range more often. Who wouldn't? With the...

How to Disassemble a CMMG .22 LR Conversion Kit

Owners of the CMMG® .22 LR Conversion Kit will, at some point, need to disassemble the kit for...